Hikvision DS-2CD4A24FWD-IZ(4.7-94MM) 2MP

Hikvision DS-2CD4A24FWD-IZ(4.7-94MM) 2MP IR Outdoor Bullet Camera

Camera

Image Sensor:

1/2.8" Progressive Scan CMOS

Signal System:

PAL/NTSC

Min. Illumination:

0.005 Lux @ (F1.2, AGC ON), 0 lux with IR

0.007 Lux @ (F1.4, AGC ON), 0 lux with IR

Shutter time:

1/3s ~ 1/100,000s

Slow shutter:

support

Lens:

4.7-94mm @ F1.4 angle of view:53.8°~3.1°

Lens Mount:

AF automatic focusing and motorized zoom lens

Auto Iris:

DC drive

Day& Night:

IR cut filter with auto switch

Wide Dynamic Range:

120 dB

Digital noise reduction:

3D DNR

Focus:

Motorized VF lens(-Z model)

Compression Standard

Video Compression:

H.265+/H.265/H.264+/H.264/MJPEG

H.264 code profile:

Baseline Profile / Main Profile / High Profile

Video bit rate:

32Kbps~16Mbps

Audio Compression:

G.711/G.722.1/G.726/MP2L2

Audio bit rate:

64Kbps(G.711) / 16Kbps(G.722.1) / 16Kbps(G.726) / 32-128Kbps(MP2L2)

Dual Stream:

Yes

Image

Max. Image Resolution:

1920 x 1080

Frame Rate:

50Hz: 50fps (1920 × 1080)/(1280 × 960)/(1280 × 720)

60Hz: 60fps (1920 × 1080)/(1280 × 960)/(1280 × 720)

Image Enhancement:

EIS/BLC/3D DNR/ROI/Defog

Image Settings:

Rotate Mode, Saturation, Brightness, Contrast, Sharpness adjustable by client software or web browser

Distortion Correction:

support

Target Cropping:

support

BLC:

Yes, zone configurable

Smart Defog:

support

EIS:

support

3D DNR:

support

ROI:

support

Picture Overlay:

LOGO picture can be overlaid on video with 128x128 24bit bmp format

Day/Night Switch:

Auto/Schedule/Triggered by Alarm In

Network

Network Storage:

NAS (Support NFS,SMB/CIFS), ANR

Alarm Trigger:

Motion detection, tampering alarm, network disconnect , IP address conflict, storage exception

Protocols:

TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour

General Function:

User Authentication, Watermark, IP address filtering

System Compatibility:

ONVIF (Profile S, Profile G), ISAPI

Interface

Audio:

1-ch 3.5 mm audio in (Mic in/Line in)/out interface

Communication Interface:

1 RJ45 10M / 100M Ethernet interface and 1 RS-485 interface

Alarm:

1 input, 1 output (up to DC24V 1A or AC110V 500mA)

Alarm Input:

1

Alarm Output:

1

Video Output:

1Vp-p Composite Output (75 Ω, BNC)

On-board storage:

Built-in Micro SD/SDHC/SDXC slot, up to 128 GB

Reset Button:

Yes

Audio

Environment Noise Filtering:

Support

Audio I/O:

Support dual audio track, stereo

Audio Sampling Rate:

16kHz / 32kHz / 44.1kHz / 48kHz

Smart Feature-set

Behavior Analysis:

Line crossing detection, Intrusion detection, Region entrance, Region exiting, Unattended baggage, Object removal

Line Crossing Detection:

Cross a pre-defined virtual line

Intrusion Detection:

Enter and loiter in a pre-defined virtual region

Region Entrance:

Enter a pre-defined virtual region from the outside place

Region Exiting:

Exit from a pre-defined virtual region

Unattended Baggage:

Objects left over in the pre-defined region such as the baggage, purse, dangerous materials

Object Removal:

Objects removed from the pre-defined region, such as the exhibits on display.

Exception Detections:

Scene change detection, Sudden audio increase/decrease detection, Audio loss detection, Defocus detection

Recognition:

Face detection recognition

Statistics:

Object Counting (Entrance and Exit object number is accounted and showed on screen in real time)

General

Operating Conditions:

-30 °C – 60 °C (-22 °F – 140 °F)

Humidity 95% or less (non-condensing)

-H: -40 °C – 60 °C (-40 °F – 140 °F) with smart heater on

Power Supply:

12 V DC ± 10%, PoE (802.3at)

Power Consumption:

DC: 10.8W, PoE: 14W

Weather Proof:

IP67

IR Range:

Up to 120m

Dimensions:

100×103.9×311.8mm (3.94” × 4.09” × 12.28”)

Weight:

2000 g (4.41 lbs)